Industrial Flash Memory

SSD 1.8" SATA 512GB TLC

Ref.Mozaïk Storage : PMS-6814

SSD 1.8" SATA 512GB TLC, PHANES-W series by APRO. SATA III interface. Read 540 MB/s, write 470 MB/s, 540 TBW. Operating 0°C ~ +70°C. MTBF > 3,000,000 hours. Quote on request.

REQUEST INQUIRY

CALLBACK REQUEST

Description

Ref.Manufacturer : SP8SF512G-PWCT5(TG)
Series : PHANES-W Series
Manufacturer : APRO Co. Ltd.
Operating temp. : 0°C ~ +70°C

Product specifications

Manufacturer APRO Co. Ltd.
Manufacturer reference number SP8SF512G-PWCT5(TG)
Sub category 1.8'' SSD
Interface SATA III
Flash type 3D TLC
Capacity 512 GB
Endurance P/E Cycle (max.) 3 000 P/E cycles
Read Sequential (max.) 540 MB/s
Write Sequential (max.) 470 MB/s
TBW (max.) 540 TB
MTBF 3 000 000 hours
S.M.A.R.T. functionalities Yes
Operating temperature 0°C ~ +70°C
Storage temperature -20ºC ~ +80ºC
Power 3.3V +-5%
Vibrations 0°C ~ +70°C
Chocs 1500 G - 0.5ms - 3 axis
Additional information Industrial 1.8" SATA III SSD with KIOXIA BiCS5 3D TLC NAND flash
Compatibility: Compliant with SATA Revision 3.2; SATA 1.5Gbps/3.0Gbps/6.0Gbps data transfer rate; ATA-8 ACS4 command set
ECC: Designed with hardware LDPC ECC engine with hard-decision and soft-decision decoding
MTBF: > 3.0 million hours
micro SATA 7 pins (data) + 9 pins (power connector) host Interface
1.8" form-factor (shorter than PCMCIA Type II form-factor)
S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) feature set support
Native Command Queuing (NCQ) support
TRIM maintenance command support
Both Static & Dynamic wear-leveling algorithm
Hardware Low Density Parity Check Code / LDPC support
Support bad Block Management
Support DIPM/HIPM Mode for power saving
Support UART / GPIO function
Support of AES 256 & TCG OPAL(Optional)
CE & FCC certified / RoHS & REACH compliant
Certificates CE / FCC
Weight 25 g
Dimensions 54mm x 78.5mm x 5mm
Warranty 2 years