Industrial Flash Memory

SSD 2.5" SATA 4TB TLC -40/85°C

Ref.Mozaïk Storage : PMS-6926

SSD 2.5" SATA 4TB TLC -40/85°C, PHANES-W series by APRO. SATA III interface. Read 550 MB/s, write 520 MB/s, 5500 TBW. MTBF > 4,000,000 hours. Quote on request.

REQUEST INQUIRY

CALLBACK REQUEST

Description

Ref.Manufacturer : WR7SF004T-PWIT8(TG)
Series : PHANES-W Series
Manufacturer : APRO Co. Ltd.
Operating temp. : -40°C ~ +85°C
Form factor : Metallic

Product specifications

Manufacturer APRO Co. Ltd.
Manufacturer reference number WR7SF004T-PWIT8(TG)
Sub category 2.5'' SSD
Interface SATA III
Flash type 3D TLC
Form factor Metallic
Capacity 4 GB
Endurance P/E Cycle (max.) 3 000 P/E cycles
Read Sequential (max.) 550 MB/s
Write Sequential (max.) 520 MB/s
TBW (max.) 5500 TB
MTBF 4 000 000 hours
S.M.A.R.T. functionalities Yes
Operating temperature -40°C ~ +85°C
Storage temperature -40ºC ~ +85ºC
Power 3.3V +-5%
Vibrations 80 Hz ~ 2000 Hz - 20G - 3 axes
Chocs 1500 G - 0.5ms - 3 axis
Additional information Industrial 2.5" rugged metal SATA III SSD with KIOXIA BiCS8 3D TLC NAND flash
Compatibility: Compliant with SATA Revision 3.2; SATA 1.5Gb/s; SATA 3Gb/s & SATA 6Gb/s; ATA-8 ACS4 command set
ECC: Designed with hardware LDPC ECC engine with hard-decision and soft-decision decoding
MTBF: > 4.0 million hours
Standard 2.5" SATA Flash Disk form-factor (7mm)
SATA 7-pin (data) + 15-pin (power connector) SATA Interface
S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) feature set support
Native Command Queuing (NCQ) support
TRIM maintenance command support
Both Static & Dynamic wear-leveling algorithm
Hardware Low Density Parity Check Code / LDPC support
Support bad Block Management
Support DIPM/HIPM Mode for power saving
Support UART / GPIO function
Support of AES 256 & TCG OPAL(Optional)
CE & FCC certified / RoHS & REACH compliant
Certificates CE / FCC
Weight 50 g
Dimensions 100mm x 69.9mm x 7mm
Warranty 2 years