Industrial Flash Memory

DOM SATA 8GB MLC -40/85°C

Ref.Mozaïk Storage : PMS-6725

DOM SATA 8GB MLC -40/85°C, MUSE-D series by APRO. SATA III interface. Read 140 MB/s, write 25 MB/s, 16 TBW. Quote on request.
Description
  • Ref.Manufacturer : WBMSF008G-VDCTM-HS(F)C
  • Series : MUSE-D Series
  • Manufacturer : APRO Co. Ltd.
  • Operating temp. : -40°C ~ +85°C
  • Form factor : DOM HS

Product specifications

  • Manufacturer APRO Co. Ltd.
  • Manufacturer reference number WBMSF008G-VDCTM-HS(F)C
  • Sub category DOM
  • Interface SATA III
  • Flash type MLC
  • Form factor DOM HS
  • Capacity 8 GB
  • Endurance P/E Cycle (max.) 3 000 P/E cycles
  • Read Sequential (max.) 140 MB/s
  • Write Sequential (max.) 25 MB/s
  • TBW (max.) 15.6 TB
  • S.M.A.R.T. functionalities Yes
  • Operating temperature -40°C ~ +85°C
  • Storage temperature -50ºC ~ +95ºC
  • Power 5V +-5%
  • Vibrations 70 Hz ~ 2000 Hz - 20G - 3 axes
  • Chocs 1500 G - 0.5ms - 3 axis
  • Additional information Industrial SATA III Disk On Module (DOM) with KIOXIA 15nm MLC NAND flash
    Compatibility: Compliant with SATA Revision 3.1; SATA 1.5Gbps/3.0Gbps/6.0Gbps data transfer rate
    ECC: Designed with hardware LDPC ECC engine Low-density parity-check (LDPC) codes
    Standard 7 pins SATA female connector
    Optional built-in power pin as the 7th pin of 7pin header (w/fuse) or power input power cable (w/o fuse)
    Conformal coating on the whole PCBA
    S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) feature set support
    Native Command Queuing (NCQ) support
    TRIM maintenance command support
    Static wear-leveling algorithm
    Support bad Block Management
    CE & FCC certified / RoHS & REACH compliant
  • Certificates CE / FCC
  • Weight 20 g
  • Dimensions 18mm x 30.3mm
  • Warranty 2 years

Products related to this item

Thank you for visiting our site!

You have below not found on our site?

Contact us by email, phone or by filling out the form. We will get back to you as soon as possible!

12 rue Lepic, 75018 Paris

This field is hidden when viewing the form